Rutters Guitar Hardware

Rutters Vintage Trem Bridge Plate for Strat, For Use With Tele Saddles

This nickel-plated, cold roll steel Rutters Strat trem bridge plate has vintage 2-7/32" mounting spacing, with 2-1/8" string spacing, allowing for the use of Tele saddles.

Note that the string holes in this plate will not match exactly with the holes on the block. This does not impact the function or playing of the guitar.

Mounting screws included.

$80.00

Quantity:  

Rutters Shallow Twisted Machined Jack Cup, Chrome

Early 50s look but shallower so a right angle plug can be used. Knurling cut on a spiral so it twists in place and stays there. Chrome-plated steel.
Made in USA.

$30.00

Quantity:  

Rutters Shallow Twisted Machined Jack Cup, Nickel

Early 50s look but with a shallower profile so you can use a right angle plug. The spiral-cut knurling allows the cup to be twisted into place and stay there. Nickel-plated steel.
Made in USA.

$30.00

Quantity:  

Rutters Single Slot Truss Nut

Machined to correct vintage specs, nickel-plated steel. 10-32 thread.
Made in USA.

$10.00

Quantity:  

Rutters 1950 Flat Top Strap Buttons, Nickel (Set of 2)

These period correct 1950 nickel-plated strap buttons by Rutters Guitars are made from the same CRS alloy as the originals.  They have the flatter head of the original 1950-1951 buttons.
Period correct slot head mounting screws included.
Made in USA.

$25.00

Quantity:  

Rutters 1954 Strap Buttons, Nickel (Set of 2)

These period correct nickel-plated strap buttons by Rutters Guitars are made from the same CRS alloy as the originals.  They have a slightly rounder head than the 1950-1951 buttons and are the correct strap button for 1952 through the 1960's.
Mounting screws included.
Made in USA.

$25.00

Quantity:  

Rutters Vintage String Ferrules, with Lip (Set of 6)

Rutters Guitars period-correct string ferrules with lip, milled from vintage-correct steel. Nickel plated. Mounting hole diameter is 5/16 inch.
Made in USA.

$35.00

Quantity:  

Rutters 1950 Vintage String Tree

This 1950 nickel-plated string tree is machined to correct vintage specs using the correct steel. Includes #4 slotted wood screw.

$20.00

Quantity:  

Rutters 1951 Vintage String Tree

This 1951 nickel-plated string tree is machined to correct vintage specs using the correct steel. Includes #4 slotted wood screw.

$20.00

Quantity:  

NEW! Rutters Slot-Head Nickel-Plated Tele Neck Pickup Screws (Set of 2)

Set of 2 vintage-correct slot head nickel-plated tele neck pickup screws.

$10.00

Quantity: