Guitar Hardware

Rutters Shallow Twisted Machined Jack Cup, Chrome

Early 50s look but shallower so a right angle plug can be used. Knurling cut on a spiral so it twists in place and stays there. Chrome-plated steel.
Made in USA.

$30.00

Quantity:  

Rutters Shallow Twisted Machined Jack Cup, Nickel

Early 50s look but with a shallower profile so you can use a right angle plug. The spiral-cut knurling allows the cup to be twisted into place and stay there. Nickel-plated steel.
Made in USA.

$30.00

Currently Out of Stock

Electrosocket Jack for Tele®

Mounting screws included.

Finish:

Satin Chrome	$12.55
Chrome	$12.55
Nickel	$12.55
Brushed Gold	$12.55
Satin Black	$14.20
Black	$14.20
Gold	$16.50

Quantity:  

Jack Cup for Telecaster®

Mounting clip included.

Finish:

Chrome	$1.64
Black	$3.30
Gold	$3.95

Quantity:  

Gibson Style Jack Plate, Metal

Mounting screws included.

Finish:

Black	$6.60
Chrome	$6.60
Gold	$7.60
Nickel	$6.60

Quantity:  

Gibson Style Jack Plate, Plastic

Mounting screws included.

$2.65

Finish:

Cream
Black

Quantity:  

Callaham Fender® Style Strap Buttons (Set of 2)

Set of 2 stainless steel Fender®-style strap buttons. Mounting screws included.

$17.00

Quantity:  

Rutters 1950 Flat Top Strap Buttons, Nickel (Set of 2)

These period correct 1950 nickel-plated strap buttons by Rutters Guitars are made from the same CRS alloy as the originals.  They have the flatter head of the original 1950-1951 buttons.
Period correct slot head mounting screws included.
Made in USA.

$25.00

Quantity:  

Rutters 1954 Strap Buttons, Nickel (Set of 2)

These period correct nickel-plated strap buttons by Rutters Guitars are made from the same CRS alloy as the originals.  They have a slightly rounder head than the 1950-1951 buttons and are the correct strap button for 1952 through the 1960's.
Mounting screws included.
Made in USA.

$25.00

Quantity:  

Fender® Style Strap Buttons (Set of 2)

Includes mounting screws. Felt washers sold separately.

Finish:

Nickel, set of 2	$3.95
Black, set of 2	$5.30
Gold, set of 2	$5.30

Quantity:  

Gibson Strap Buttons (Set of 2)

Includes mounting screws. Felt washers sold separately.

Finish:

Nickel, set of 2	$3.95
Gold, set of 2	$5.30

Quantity:  

Schaller Style Strap Locks (Set of 2)

Finish:

Nickel	$18.50
Chrome	$18.50
Black	$26.40
Gold	$26.40

Quantity:  

Felt Washers (Set of 2)

$1.35

Color:

White, set of 2
Black, set of 2

Quantity:  

4 Bolt Neck Plate

Mounting screws included.

Finish:

Chrome	$7.75
Nickel	$7.75
Black	$10.75
Gold	$12.55

Quantity:  

Callaham High Luster Stainless Steel Neck Plate

Premium high luster stainless steel neck plate with serial number.

$35.00

Quantity:  

Callaham High Luster Stainless Steel Neck Plate, No Serial Number

Premium high luster stainless steel neck plate with no serial number.

$35.00

Quantity:  

Callaham Satin Stainless Steel Neck Plate

Premium satin nickel stainless steel neck plate, with serial number

$30.00

Quantity:  

Callaham Satin Stainless Steel Neck Plate, No Serial Number

Premium satin nickel stainless steel neck plate with no serial number.

$30.00

Quantity:  

NEW! Rutters Nickel-Plated Neck Plate with Screws

This nickel-plated neck plate is machined from cold roll steel and stamped with the Rutters logo.
Neckplate is .075" thick, which reduces bending from pressure. Nickel-plated mounting screws included.
Made in USA.

$37.50

Quantity:  

Nickel Neck Plate Screws (Set of 4)

Nickel plated neck plate screws. Set of 4, available in Phillips or slot head.

Style:

Phillips Head	$1.60
Slot Head	$2.40

Quantity:  

Rutters Single Slot Truss Nut

Machined to correct vintage specs, nickel-plated steel. 10-32 thread.
Made in USA.

$10.00

Quantity:  

Callaham Full Access Stainless Steel Control Plate for Telecaster®

This Callaham control plate for Tele® is manufactured from 416 stainless steel but the high luster polish makes it look like nickel. Callaham moved the traditional volume hole an additional 3/8" away from the switch for easier access.

$32.00

Quantity:  

Control Plate for Telecaster®

Screws sold separately.

Finish:

Nickel	$20.40
Chrome	$19.20
Black	$28.80
Gold	$30.00

Quantity:  

Callaham String Ferrules With Lip (Set of 6)

Stainless steel string ferrules with lip. Mounting hole diameter is 5/16 inch.
Made in USA.

$24.50

Quantity:  

Callaham String Ferrules Without Lip, .375 (Set of 6)

Stainless steel .375 string ferrules without lip. Mounting hole diameter is 3/8 inch.
Made in USA

$34.50

Currently Out of Stock

Rutters Vintage String Ferrules, with Lip (Set of 6)

Rutters Guitars period-correct string ferrules with lip, milled from vintage-correct steel. Nickel plated. Mounting hole diameter is 5/16 inch.
Made in USA.

$35.00

Quantity:  

String Ferrules, No Lip (Set of 6)

Vintage style, no lip ferrules for flush fit installation. Mounting hole diameter is 3/8".

Finish:

Nickel	$7.75
Gold	$10.50

Quantity:  

String Ferrules with Lip, Ridged (Set of 6)

Nickel plated string ferrules with 25/64" diameter flange. Mounting hole diameter is 5/16".

$7.75

Quantity:  

String Ferrules with Lip, Smooth (Set of 6)

Nickel plated string ferrules with 9.3mm diameter flange. Mounting hole diameter is 5/16 inch.

$7.75

Quantity:  

Music City Bridge Three String Tree

The Three String Tree by Music City Bridge offers an elegant solution to the age-old problem of the buzzy G string on guitars with 6-in-line headstocks.

If you've ever wished that your Fender-style guitar had a better break angle for the G string but didn't want to drill an additional hole in your headstock to add a second string tree, the Music City Bridge Three String Tree is for you. The Three String Tree uses the existing screw hole from your original string tree so there is no need to modify your headstock. It functions like a normal string tree but has an extra wing that reaches over to grab the G string, giving it just the right amount of downward pull. The Three String Tree comes with three heights of Fender-style nylon risers to allow you to fine tune it to any break angle you desire.

Customer Feedback

“It’s brilliant... Why didn’t they make this in 1963?” - Kenny Vaughan

$6.50

Finish:

Polished NIckel
Aged Nickel
Gold

Quantity:  

Callaham Stainless Steel Vintage 50's Style String Tree

This stainless steel vintage 50's style string tree from Callaham Guitars has polished string slots to reduce friction.

$8.75

Quantity:  

Vintage 50's Style String Tree

Mounting screw included.

Finish:

Nickel	$3.00
Black	$6.60
Gold	$6.60

Quantity:  

Vintage Fender®-Style String Tree, set of 2

Vintage Fender®-style string tree. Includes screw and spacer.

$8.50

Quantity:  

Tapered Reamer, 1/8" to 1/2"

The correct hand tool for safely enlarging peg head and other holes. Alternate use between front and back of hole, stopping to check your work often to avoid making holes too large.

$9.60

Quantity:  

#36 Drill Bit

Correct sized bit for drilling holes for the stabilizer pins of Sperzel Trim Lock Locking Tuners and Sound Lock Tuners. We recommend that you measure the depth of your required hole carefully and mark this measurement on your drill bit with several wraps of masking tape to avoid drilling through your work.

$2.50

Currently Out of Stock

Fender® Original Nut Blank, Set of 2

Set of two un-slottted string nuts made of melamine and tinted to look like a vintage bone nut. 1-3/4" wide, with a 9-1/2" radius. This nut blank will fit most Fender® guitars.
Mfr. Part #099-0492-000

$4.99

Quantity:  

Rutters 1950 Vintage String Tree

This 1950 nickel-plated string tree is machined to correct vintage specs using the correct steel. Includes #4 slotted wood screw.

$20.00

Quantity:  

Rutters 1951 Vintage String Tree

This 1951 nickel-plated string tree is machined to correct vintage specs using the correct steel. Includes #4 slotted wood screw.

$20.00

Quantity: